- 358
- 795 897
Camatron Sewing Machine Inc.
United States
Приєднався 21 лют 2010
Welcome to our video Channel. At Camatron Sewing Machine Inc. , we build custom machines for all types of sewing applications. We specialize in computer controlled bartack machines. Our 47 years of experience and knowledge gives us the ability to quickly find and develop your application to save you the most time and money. Our extensive parts inventory helps keep your machines up and running.
As you search our channel you will see videos that show how to operate certain machines, some technical information and some pretty interesting applications.
There are many applications that we do no post simply because of time, so if you have something in mind please send us an email or give us a call.
Thanks for visiting
Robert Ross
President
Camatron Sewing Machine Inc.
As you search our channel you will see videos that show how to operate certain machines, some technical information and some pretty interesting applications.
There are many applications that we do no post simply because of time, so if you have something in mind please send us an email or give us a call.
Thanks for visiting
Robert Ross
President
Camatron Sewing Machine Inc.
Juki Lk1920HA/MC676 sewing sportswear label
This machine uses and "inside clamp" to keep the label flat while sewing quilted material
Переглядів: 165
Відео
AMS210EN2210 SEWING DOUBLE HOOK AND LOOP BARTACK
Переглядів 5233 місяці тому
AMS210ENZL1510X90023
Переглядів 4984 місяці тому
THIS MACHINE IS SEWING MULTIPLE PATTERNS ON WEBBING WITH 207 THREAD,
LK1900BN SHOWING 2 PATTERNS
Переглядів 3724 місяці тому
LK1900BN SEWING 3/4 BX-- REMOVING THE WIPER
Переглядів 5954 місяці тому
Hi in this video, we show the machine sewing a 3/4 bx, but here, when sewing thicker material, the thread wiper will interfere ,so we show how to remove it. We also added a large extension plate.
68 class reg bobbin sewing 3/4 x 3/4 box and cross with 64 stitches.
Переглядів 3825 місяців тому
lk1900BN with pneumatic tension
Переглядів 6696 місяців тому
68 CLASS REPAIR
Переглядів 5796 місяців тому
MITSUBISHI PLK2516 MOP APPLICATION
Переглядів 3196 місяців тому
MITSUBISHI PLK2516 BASIC OPERATING INSTRUCTIONS
Переглядів 3236 місяців тому
This video shows some basic operating /start up procedures. Also how to wind a bobbin in certain situations
68 class 3qtr x 3 qtr bx patterns
Переглядів 4336 місяців тому
AMS221EN2516 SEW POCKET FLAP--PALLET CLAMP
Переглядів 4496 місяців тому
JUKI AMS210EN1306 SEWING LEATHER/SUEDE
Переглядів 4587 місяців тому
AMS224EN4560 WITH CUSTOM 360 DEVICE SEWING RELECTIVE TAPE
Переглядів 2,2 тис.7 місяців тому
AMS210EN1306 SEWING EMBLEM
Переглядів 3828 місяців тому
What is the horsepower of the EFKA servo motor? Never heard of the brand before
Efka is a brand from Germany. They have been around for a long time. However, some mfg. was moved to Ukraine and so with the war, has been having issues. The motor is 550 watts.
Plzzz need the software dear
Hallo Camatron I would like to ask how to make a zigzag patterin with head and tail have a lock lXVVVVXl
Can you give me program. Thank you.
sorry, but it can be installed by us.
Is there anyway to slow down the speed of the front tack & back tack on CP180? Mine is way too fast and always breaks the thread or yanks it out of the needle starting unless its set to 1-1-1-1
Hi there is a way to have it "soft start" Send me an email thru my website and I will try to help.
Espera, el área de costura de esta máquina, la LK 1900AN, es de 40mm en X ¿como consigues abrirlo más?
Hi can you make it to do a square? And what's the program please
you would need to purchase the pattern and the attachment
Thanks and where would I do that?
We sell them ,so...
this is GOLD thank YOU sir !
I have an m3 file i need to send to the juki controller and can't get it to read. What size flash drives do you recommend, and are you using fat32 with them? That manual for the IP420 is terrible.
You can format the flash drive on the IP420, then you will have the proper file size. The big issue would be to make sure you are in the proper folder. Haven't tried uploading an older M3 file, but I bet it needs to be in a folder AMS like it was on the older floppy.
@@camatronsewing Thanks for the answer. I figured it out. What I was trying to accomplish was load a new .m3 file on the machine as an additional pattern. I used a 4gb fat32 formatted flash drive, created the folder structure as shown in the manual, copied the m3 file in to the correct folder and remaed it also as shown in the manual, then was able to import to the ip420 in the next available slot.
Holy cow. That thing is like a cruise missile.
I just acquired a Juki AMS 210-EN. I’m thoroughly confused about how to create pattern files. What is this PM-1 software?
Pm-1 is a pc based app to create pattern files for a variety of juki sewing machines. The AMS has the ability to do the same directly on the machine. I find it much easier to use the Pm-1.
Kannada language please transportation sar
Good
X/Y ?
yes
nice 👍 video for pattern sewing machine
thanks!
Hi if you convert the machine to have a reverse do you loose the ability to adjust the stitch length, as I cannot see the stitch length knob,
Basically, the stitch length is adjusted near the reverse cylinder on the back of the machine. You can see 2 adjustable stops.
Ser jee Salander fating video
All okay but video not cleration so useful lu dives and normal pro settings
Which type of the file can be used for LK1900A-hs
If you have an IP panel, you can use VDT format and upload directly to the lk1900a. Otherwise you need to treat it as the older Lk1900 and save to an e-prom in LK format
@@camatronsewing sorry I don't have IP panel and in PM-1 software didn't show the option ok LK format, Secondly I need to know for copy on Eprom can we directly copy on Eprom or need other driver?
@@khalil-ur-rehmansiddique1973 on the PM-1 you should have the Lk1900 machine type . the file will then beLK000.ROM. Then you would send that file to an e-prom burner and save to the e-prom as intel hex file
Hi Boss, I need to know that which format can be used for EPROM
Apka no.do Mashin parches karna hai
Where did you find a v belt pulley for the machine? Thanks
I made that set up. Machined and special pulley and mounted.
It's not ok 😭😭
what is not ok?
Tell me the time
hi
hey how much for the software I have an older version I want your version it runs on windows 10 how much ?
Reach out by email for pricing.
Hi,I want to know how to set work clamp two stage operations in this machine,Can u guide me
it requires special software -- we would need the machine here to do that
Who can give me the Juki PM-1 software
contact your local Juki Agent to purchase
deu certinho aqui, obrigado 👍
Potresti fare un tutorial per realizzare i programmi per zz 2299c?
I have same machine! My question is when it backstitch and cut the tread fine! But when needle reposition back even with the foot, it sometimes needle is below the the foot half way down or down to the plate, I have to turn the wheel to put needle up where supposed to be! Why does that happen? How do I fix it?
It could be setting on the machine that changes how much torque the motor has so that it does not drift from the needle up position. You can call my office and we can try to help
@@camatronsewing I looking at today! Usually when you turn machine that runs on air! Needle reposition itself and wasn't doing that like it should. So something is off.
Can you give me software
you need to purchase this from your local Juki agent
Interesting
Hi I just open my own drapery shop I m looking into lk1920 where can I purchase it ?
please visit our website www.camatron.com and submit a request for quotation on our contact page.
HEY BROTHER CAN U HELP ME FROM WHERE I CAN DOWNLOD THIS SOFTWARE
You need to purchase this from your local Juki agent. That is the only way to get this software.
@@camatronsewing What would be the price of the software??
@@PRANAVSINGHRAJPUT9966 $500 US. I can not sell it to you unless you are based in the USA, where are you located?
CAN U PLZ HELP ME FROM WHERE I CAN DOWNLOD THIS SOFTWARE ???????????????????
i have this software if you want by 100$
Can you guys make custom seize and sale the drive ready for upload ?
Of course we can!
Where did you get that cleat cover?
You wouldn’t be selling this machine would you. I’m looking for this exact setup. Came across your video.
We custom build them, so go to my contact page on my website www.camatron.com and we can discuss.
Hi
Hey - thanks for this video! I ordered the plate/foot, installed them, activated the box stitch program, but the machine will not stitch it. Saying e43 (stich pitch more than 10mm) it will still stitch the straight bartack programs, but not any box pattern. If I reduce the size of the pattern with the scale selection, it will drop the foot but lock and tell me e7 (machine locked). But machine is not locked because it will stitch a bartack. Any suggestions?
I would need more info--call me to discuss
sir ,how to download this softwerw?
You need to purchase this from Juki
Hola quiero saber como tu puede leer un eeprom de una maquina de back tack juki 1920 para ver el programa pm1 y modificarlo
What is the maximum thickness for lined and interlined drapes? I found your video very helpful.
Hi, so where the pleats are, 5/8 thick works the best.
❤💯
What software do you use to create the patterns?
Is there different shapes or only rectangular?
Any shape you can draw...as long as we can hold it, we can sew it!
@@robertross9633 how are the custom brackets made?
@@clockleon that's exactly what we do at camatron. We make the fixtures and create the patterns.
@@robertross9633 where is your business located?
aap ka contact no... bejiy na
what is the name of this software
software name please
PM-1
aap ka contact no... please
@@camatronsewing aap ka contact no... please